| Brand Model |
TINYON IP 2000 WI |
| Power |
| Power Supply |
+5 VDC via supplied power adapter |
| Power Consumption |
4.4 W typical |
| PoE |
100-240 VAC to +5 VDC power supply
included |
| Sensor |
| Type |
1/4-inch CMOS |
| Total sensor pixels |
1280 x 800 (1MP) |
| Video performance – Sensitivity
(3200K, 89% reflectivity, 30IRE, F2.8) |
| Sensitivity |
1.0 lx 0.0 lx (with LED) |
| Video performance - Dynamic range |
| Dynamic range |
76 dB |
| Video streaming |
| Video compression |
H.264 (MP); M-JPEG |
| Streaming |
Multiple configurable streams in H.264 and MJPEG,
configurable frame rate and bandwidth. |
| Overall IP Delay |
Min. 120 ms, Max. 340 ms |
| GOP structure |
IP, IBP, IBBP |
| Encoding interval |
1 to 30 ips |
| Video resolution (H x V) |
| 720p HD |
1280 x 720 (at 30 ips) |
| Upright 9:16
(cropped) |
400 x 720 |
| D1 4:3 (downscaled/
cropped) |
704 x 480 |
| 480p SD |
Encoding: 704 x 480;
Displayed: 854 x 480 |
| 432p SD |
768 x 432 |
| 288p SD |
512 x 288 |
| 240p SD |
Encoding: 352 x 240;
Displayed: 432 x 240 |
| 144p SD |
256 x 144 |
| Video functions |
| Adjustable picture
settings
|
Contrast, Saturation, Brightness |
| White Balance
|
Standard automatic mode, manual mode and
hold |
| Shutter
|
Automatic Electronic Shutter (1/30 to
1/150000)
Fixed shutter (1/30 to 1/15000) selectable |
| Backlight
compensation
|
On/off |
| Noise reduction
|
Intelligent Dynamic Noise Reduction |
| Privacy Masking
|
Four independent areas, fully programmable |
| Video Analysis |
MOTION+ |
| Other functions |
Image mirror, Image flip, Pixel counter, Video
watermarking, Display stamping, Motion
detection, Tamper alarm, Audio alarm |
Audio streaming |
| Standard |
G.711, 8 kHz sampling rate
L16, 16 kHz sampling rate
AAC-LC, 48 kbps at 16 kHz sampling rate
AAC-LC, 80 kbps at 16 kHz sampling rate |
| Signal-to-Noise Ratio |
>50 dB |
| Audio Streaming |
Full-duplex / half duplex |
Input/output |
| Audio input |
Built-in microphone |
| Audio output |
Built-in loudspeaker |
| Alarm input |
1 input |
| Alarm activation
voltage |
0 to 3.3 VDC active low, or short |
| Alarm output |
1 output |
| Alarm output voltage |
+5 VDC
Load current 1 A max. |
| Detection |
| Detector |
PIR (passive infrared) |
| Distance |
5 m (16 ft) |
| Detection angle |
90° (H) |
| Night vision |
| Distance |
4 m (13 ft) |
| Illumination |
White light LED |
| Optical |
| Lens type |
Fixed 2.5 mm, F2.8 |
| Lens mount |
Board mounted |
| Horizontal field of
view |
89° |
| Vertical field of view |
50° |
| Software |
| Unit Configuration |
Via web browser or Configuration Manager |
| Firmware update |
Remotely programmable |
| Software viewer |
Web browser, Bosch Video Client, or third
party software |
| Wireless LAN |
| Wireless standard |
IEEE 802.11b/g/n |
| Wireless security |
WPA-PSK (TKIP), WPA2-PSK (AES)/td>
|
| WiFi protected setup |
WPS button, PIN |
| Network |
| Protocols |
IPv4, IPv6, UDP, TCP, HTTP, HTTPS, RTP/
RTCP, IGMP V2/V3, ICMP, ICMPv6, RTSP,
FTP, Telnet, ARP, DHCP, APIPA (Auto-IP, link
local address), NTP (SNTP), SNMP (V1, MIBII),
802.1x, DNS, DNSv6, DDNS
(DynDNS.org, selfHOST.de, no-ip.com),
SMTP, iSCSI, UPnP (SSDP), DiffServ (QoS),
LLDP, SOAP, Dropbox, CHAP, digest
authentication |
| Encryption |
TLS 1.0, SSL, DES, 3DES |
| Ethernet |
10/100 Base-T, auto-sensing, half/full duplex
|
| Connectivity |
ONVIF Profile S , Auto-MDIX
|
| Mechanical |
| Dimensions
(H x W x D) |
109 x 65 x 47 mm (4.29 x 2.56 x 1.85 in)
|
| Weight |
105 g (3.70 oz)
|